login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Aurora [ MORE REVIEWS ] [ NEW STORIES ]

In-Box Review
148
Mace TM-76 Guided Missile
Mace – TM -76 Guided Missile
  • move

by: Frederick Boucher [ JPTRR ]


Originally published on:
AeroScale

introduction
During a golden age of aviation tarnished by the Cold War many new aircraft were produced, including what became known as cruise missiles. One was the Martin TM-76 Mace. Aurora was quick to cut tooling to make injection molded models of contemporary subjects and in 1958 issued their kit MACE – TM -76 GUIDED MISSILE, kit 130 - .79. The “.79” was Aurora’s MSRP (Manufacturer Suggested Retail Price), a part of the box despised by retailers. Aurora also scaled it to 1/48.

Whether my interest at the time made space and missile subjects invisible to me, or perhaps Aurora had already discontinued the kits, I do not recall Aurora rocket and missile kits vying for shelf space at my hometown model outlets: City Cycle Hobby Shop, Bell or Davis Drug Stores, Value Village; nor at Kresge, Woolworths, Sears, or JC Pennys.

Thanks to OldModelKits.com we have this complete kit to examine on nostalgia base 1.

Mace Model
Mace was packaged in an Aurora standard “long box” carton, a sturdy cardboard conventional lid-tray design. Box art shows a Mace launching near a TM-76 base. Although restrained by packing paper the sprues were loose in the box which means that several pieces could be expected to be rolling around loose. Instructions and decals were included, and occasionally a promotional insert, which this kit contained.

A rather simple model, 10 pieces build up this subject, injection molded in a glossy white. A clear two-piece display stand was included. It displayed an area for the kit subject decal, raised textured latitude and longitude lines, and a image of North America. “Aurora Plastics Corp” adorns the bottom edge.

Molding quality
Molding is good in that most parts are well defined, with no flash, some slight mold seams, and few low sink holes. I did not find any obvious ejector marks. I test-fitted the Mace together and found most of the seams joined tight. Liquid cement should fill them. The glossy white styrene seems a bit brittle, though.

Scale?
Aurora’s TM-76 scales out to the advertised 1/48 scale.

detail
Aurora tooled raised textured areas on the models where markings and insignia would be. That was typical of many model makers of the era. They should be easy enough to remove from the rocket if you want to put the time and effort into sanding them away.

Martin strengthened the rudder of the "B" missile with several narrow rectangular corrugations. This does not have those, thus it is a TM-76A.

There are few hair-thin raised panel lines, otherwise surface detail is spares. Mace had some raised rivets, several recessed wells along the nose, and an “L”-shaped pitot tube. Those details were not cut into the mold. Many raised rivets studded the rear of the booster rocket. Those details are also not molded. Finally, the belly intake for the Allison J33 is molded closed.

Instructions, decals, painting
Aurora printed up a large multifold paper sheet with text, line art and half-tone illustrations. One side is the assembly instructions and the other side advertises all of their models, with emphasis on their series of “Whirlybirds” and tanks. Aurora hawked their brand of paint and glue in the instructions, too.

Assembly is guided via the “exploded” style of illustration. Assembly is shown in two illustrations and about a dozen written steps. A concise history of the vehicle is included in a sidebar.

Martin’s Mace can be found in a riot of colors and markings. Minimal painting guidance is provided.

You can see the decals offer markings for a single TM-76 missile. Decals have thicker carrier film that extends farther from the printed graphics than is acceptable today. Yet they are sharply printed and registered. I would like to tape the sheet to a south facing window to determine how much yellowing will bleach out, and then try soaking a decal; would it disintegrate? All of those markings were intended to be applied over the textured areas.

conclusion
This model is acceptably molded. Foibles are out-of-scale parts, molded insignia areas – glad those aren’t used anymore! They appear to be relatively easy to sand away.

Certainly, the quality of molding is not up to today’s standards compared to some of the main model manufacturers, but then again some of their latest-greatest aren’t up to their hype, either! If you have one of these kits, treat yourself and build it. I think it would be a very interesting addition for your Cold War Pilotless Bomber Squadron collection.

We thank OldModelKits.com for kindly providing this kit for review!

history
The major difference between the Matador and Mace missiles was the fact that both Mace "A" and "B" missiles were "Fire and Forget" weapons. All versions of the Matador were Command Guidance missiles, all Mace were Preset Guidance Units. There was no additional involvement once the Mace missiles were launched. The USAF MSQ guidance vans required for the USAF Matador guidance were removed from the German countryside after September 1962 when the last Matador operational units were deactivated.

Both Mace models had a rounded nose cone, with both versions having a longer fuel cell forward of the wing extending the fuselage considerably over the Matador. The high shoulder mounted anhedral, or cathedral (anti-dihedral) wing with the "T" tail were easily recognizable features of both missiles, the Mace having a shorter wing span of only 22 feet and a longer length of 44 feet, 6 inches.

The "A" bird was primarily a "hug the ground" low level attack missile, using ATRAN (Goodyear's Automatic Terrain Recognition And Navigation map-matching radar system) while the "B" bird was designed to fly at very high altitudes for most of it's mission using unjammable inertial guidance, the AChiever system from AC Spark Plugs. The "A" Bird's mission survivability was considered quite high as intercepting the missile at speeds just below Mach 1 at altitudes considered dangerous for manned flight, especially in Europe's famous inclement weather, was beyond the air defense capabilities of the eastern block countries. The altered mission characteristics of the Mace "B" enabled almost doubling of the range of the "B" over the "A" without additional fuel capability from 650 to over 1200 nautical miles.

The wings folded back alongside the fuselage of the Mace for transport, rather than having to be removed completely as with the Matador.

Both Mace versions were fitted for the Mark 28 Thermonuclear Device
    • The TM-76A, Later renamed MGM-13A
    Deployed: Hahn Air Base, Germany - Sembach Air Base, Germany

SPECIFICATIONS: TM-76A (MGM-13A)
    • Span: 22 ft. 11 in.
    • Length: 44 ft. 6 in.
    • Height: 9 ft. 7 in.
    • Weight: 18,000 lbs. at launch
    • Armament: Mark 28
    • Sustain Engine: Allison J33-A41 of 5,200 lbs. thrust;
    • Thiokol solid-propellant booster rocket of 100,000 lbs. thrust used for launch
    • Cost: $452,000
    • PERFORMANCE: Maximum speed: 650 mph./565 knots in level flight; supersonic in final dive Range: 800 statute miles Operating altitude: N/A

The "A" Birds were fired from mobile transporters called translaunchers. The huge terracruzer tire assemblies could be swivelled out of the way allowing the launcher to sit on jack pads. The original design was to fire individual missiles directly from the launcher.

That style of deployment was replaced in the early 1960's by Rapid Fire Multiple Lauch, RFML, which concentrated launch pads in multiples of 4 missiles. RFML allowed fewer crew members and far less set up time and effort. The "roving", single launcher concept was abandoned.

The "A" Birds had Goodyear's Automatic Terrain Recognition And Navigation radar guidance system. The double, back to back nose mounted radar scanners required the "A" birds have fiberglass nose cones, usually painted Olive Drab while the rest of the bird was unpainted aluminum. Fiberglass nose cones that were not airworthy were painted red to indicate they were not to be mounted on operational missiles.

Mace missiles found in civic and public parks have had their nose cones painted red, black or white.

The last two years of Martin Marietta Mace production, 1959 and 1960, were all "B" versions.
*

_______
Sources
* "The Martin Matador and Mace Missiles." The Martin Matador and Mace Missiles History Spotters Guide. MACE US TACTICAL MISSILES, n.d. Web. 01 Nov. 2014. .

The Martin Matador and Mace Missiles Chapter One - The First Cruise Missiles. MACE US TACTICAL MISSILES, n.d. Web.
SUMMARY
Highs: A 1/48 Mace missile.
Lows: Out-of-scale parts. Molded insignia areas.
Verdict: An interesting addition for your Cold War Pilotless Bomber Squadron collection.
  Scale: 1:48
  Mfg. ID: 130
  Related Link: 
  PUBLISHED: Nov 11, 2014
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.00%
  MAKER/PUBLISHER: 61.17%

Our Thanks to Old Model Kits!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Frederick Boucher (JPTRR)
FROM: TENNESSEE, UNITED STATES

I'm a professional pilot with a degree in art. My first model was an AMT semi dump truck. Then Monogram's Lunar Lander right after the lunar landing. Next, Revell's 1/32 Bf-109G...cried havoc and released the dogs of modeling! My interests--if built before 1900, or after 1955, then I proba...

Copyright ©2017 text by Frederick Boucher [ JPTRR ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Can't say I remember this kit, but there were plenty of kits like it when I was a kid. Bright boxes with exciting graphics. The littered the shelves at The TG&Y, Kreskys, Kress, WT Grant stores when I was a kid.
NOV 11, 2014 - 05:03 PM
Fred, Another goldie oldie from the past. You're making me feel even older then I am. This kit I kind of remember. like all kits from back then, they were easy to build, and from my faintest memories, looked pretty darn good when finished. Joel
NOV 12, 2014 - 07:13 AM
Hi Joel, Mike: Very happy you enjoyed this oldie. Next up: Aurora's Regulus II, Bomarc; followed by the Kaman HOK-1, Nike Hercules, H-21, and Monogram's GAM-63 Rascal.
NOV 12, 2014 - 03:38 PM
Oh yeah, and the Hawk Beta II atomic bomber!
NOV 13, 2014 - 02:41 AM
Tip: Just hit enter to submit your reply!
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move