login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Atlas Model Railroad [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
N scale
70 Ton Ore Car
70 Ton Ore Car Atlantic Coast Line 720335
  • move

by: Frederick Boucher [ JPTRR ]


Originally published on:
RailRoad Modeling

Introduction
This N scale 70 Ton Ore Car is in the Atlas Trainman series. Trainman is Atlas’ basic ready-to-run model yet are factory equipped with knuckle couplers and feature excellent paint and printing. Their undecorated MSRP is $12.95.

70 Ton Ore Car
These tough squat hoppers are used to haul heavy ores and rock.

Trivia

AAR Class:
HMA: (Ore Car) Open top self-clearing car, having fixed sides and ends and bottom consisting of two divided hoppers with doors hinged lengthwise of car and dumping between rails.
AAR Type: K180
Detail Info: Hopper, Load Limit: less than 155,000, Non-rotary couplers

Inspection
Atlas packs these models in hard plastic lid-tray jewel cases designed for protection, presentation and stacking. Inside is the ore car securely held in a form-fitted cradle, protected from scuffing by a soft plastic sheet. Atlas included no parts diagram or documentation.

This ready-to-run model is of a 70-ton ore car design. Atlas lists seven roadnames in their catalogue. It features:
    * Ready-to-run
    * AccuMate® couplers**
    * Accurate painting and printing
    * Free-rolling trucks with brown plastic wheels
    * Full rivet detail


The model is molded well with no flash, sink marks or visible ejector marks. Rivet detail is sharp although over-scale. All ladders and rungs are cast on. The wheel sets are brown plastic.

detail
Surface detail is good. Mechanisms in the body are simulated well. Atlas includes a plastic ore load. It is toy-like.

Performance
"Jennie" (as ore hoppers are called) weighs .6 ounces, which is .2 ounces light, per NMRA RP-20.1 Car Weight. I pushed it along some Atlas code 55 track and it rolled fine.

paint and markings
Paint is smooth and opaque. Printing of the data stenciling is excellent. Even the smaller text is legible: When empty return to ACL Railroad Co. LIVE OAK< FLA.. ACL took possession of these from Bessemer and Atlas simulated their crude overpaints that the new markings are applied upon. Six roadnames and an undecorated model are offered:
    1. Atlantic Coast Line* (Brown/White)
    2. Omaha, Lincoln & Beatrice (Black/White/Red)
    3. Bessemer & Lake Erie (Brown/White)
    4. Chesapeake & Ohio* (Black/White)
    5. Chicago & North Western (Green/Yellow/Red)
    6. Soo Line (Brown/White)
    7. Undecorated

Each roadname has three road numbers.

ACL was not a major ore hauler. They moved phosphate rock for fertilizer and also limestone.

Roll it!
This diminutive ore car has plenty of surface detail. The knuckle couplers are a plus, as are the brown wheels.

Drawbacks are plastic wheels, oversize and cast on detail.

Atlas' N ore cars can fill out a yard quickly. These "jennies" can make up an interesting train on your layout. Model railroaders can enjoy these models around their N mining operations.

Please remember to tell vendors and retailers that you saw this Jennie here - on RailRoadModeling.

Ore jennies are a specialized type of hopper car designed exclusively to haul heavy loads of iron ore. The car's history can trace its roots back to the mid-1800s although as Mike Schafer notes in his book, "Freight Train Cars," it wasn't until the end of that century when vast veins of ore were discovered in the Upper Midwest did the car become a common sight, at least in those regions where mining operations were located. Notable carries such as the Milwaukee Road, Chicago & North Western, Soo Line, and especially the Duluth, Missabe & Iron Range all handle considerable amounts of ore and derived a significant portion of the revenue from such. Today, despite a sharp decrease in domestic production jennies can still be found in service.

The ore jenny, sometimes referred to simply as an ore car, was born largely out of need to more efficiently maximize a hopper's space. This particular product could just as easily be hauled in the standard hopper normally assigned in coal service. However, because ore is so much more dense a hopper can only be partially filled before its weight limit is reached. In some cases railroads continued to move ore in this fashion, even through the postwar period, providing the odd scene of a "loaded" 50 or 75-ton hopper only half full. The jenny solved this problem as it was much shorter, in both length and height, than its larger cousin but was otherwise identical in operation featuring bottom-fed chutes (usually one or two) in which ore could quickly be unloaded.

While it is unknown exactly when the first jennies entered service it is believed they began appearing during the mid-19th century when the first iron mines entered production. At that time mining operations were scattered across the east and found in states ranging from North Carolina to the Northeast. Unfortunately, most of these provided a rather low-grade ore that was not particularly profitable. Of course, everything changed when vast amounts of high-grade iron were discovered in Michigan's Upper Peninsula and northern Wisconsin during the 1840s and 1850s as well as parts of Minnesota between 1866 and 1904, according to the U.S. Geological Survey. Most mining operations here began appearing after 1870, coinciding with the widespread use of the ore jenny, which was also around the time the American steel industry blossomed.

Iron is a key component in the production of steel and railroads were poised to reap the profits from moving this commodity to new mills in places such as Pittsburgh, parts of Ohio, and the Upper Ohio Valley. The first ore jennies were rather small designs and as Patrick Dorin points out in his book, "An Illustrated Guide To American Freight Train Equipment," since they were constructed primarily of wood could only handle about 30 tons of product. As iron and steel became widely used in car construction during the early 1900s jennies, along with most other freight equipment, grew in size to 50 tons, 70 tons, and eventually 75 tons. Today, the car hauls anywhere between 85 to 100 tons and newer models are nearly identical in appearance to standard hoppers only slightly smaller in length.

To understand just how dense ore is in comparison to coal or aggregates a jenny built during the postwar period was around 24 feet in length (measured coupler to coupler) with a capacity, as previously mentioned, between 50 to 75 tons. By comparison, a hopper carrying the same tonnage was much longer, usually between 40 to 50 feet. Mr. Dorin goes on to note that the 24-foot design became an industry standard since the car fit quite well on an ore dock which utilized dumping pockets (used to load water-going freighters) that were 12 feet in length. If the train of jennies was placed just right, every other car could be spotted for unloading. Once these initial pockets were filled the entire consist was shifted to load the remaining unfilled pockets. While it may not appear so it was actually a very efficient operation.

Today, such ore docks can still be found in service but new operations often utilize car dumpers instead. During the iron industry's peak years most railroads serving the Upper Midwest all operated their own docks along the Great Lakes such as the Great Northern at Superior, Wisconsin; Milwaukee Road and Chicago & North Western at Escanaba, Michigan; Wisconsin Central/Soo Line at Ashland, Wisconsin; and the Duluth, Missabe & Iron Range at Duluth, Minnesota. Additionally, there were numerous ore docks located in the state of Ohio at locations such as Cleveland, Huron, Toledo, Lorain, Ashtabula, and Conneaut operated by railroads like the Pennsylvania, Bessemer & Lake Erie, Wheeling & Lake Erie, New York Central, and Baltimore & Ohio for transporting iron to steel mills located in West Virginia, Ohio, and Pennsylvania.

With the United States steel industry a mere shell today of what it was only 30 to 40 years ago the need for iron, and ore jennies to transport it, has dropped dramatically. However, loads of taconite still roll over the nation's rails and can be found in service on BNSF and Canadian National (after the latter acquired DM&IR in 2004). You can also find ore moving over CSX and Norfolk Southern. Despite the great decrease in production over the years, as long as portions of the Upper Midwest continue to provide rich seams of iron there will most likely always remain at least a few ore jennies rolling along in service around the country.
*
______
Source

* American-Rails.com. Ore Jennies. [Web.] n.d.

**AccuMate® couplers are made under license from AccuRail, Inc.
SUMMARY
Highs: Knuckle couplers and sharp printing and molding.
Lows: Shiny ore load. Plastic wheels, oversize and cast on detail.
Verdict: Atlas' N ore cars can fill out a yard quickly. These "jennies" can make up an interesting train on your layout. Model railroaders can enjoy these models around their N mining operations.
  Scale: N Scale
  Mfg. ID: 50 002 615
  Suggested Retail: $16.95
  Related Link: 
  PUBLISHED: May 04, 2016
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.00%
  MAKER/PUBLISHER: 87.36%

Our Thanks to Atlas Model Railroad!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item   View Vendor Homepage  More Reviews  

About Frederick Boucher (JPTRR)
FROM: TENNESSEE, UNITED STATES

I'm a professional pilot with a degree in art. My first model was an AMT semi dump truck. Then Monogram's Lunar Lander right after the lunar landing. Next, Revell's 1/32 Bf-109G...cried havoc and released the dogs of modeling! My interests--if built before 1900, or after 1955, then I proba...

Copyright ©2017 text by Frederick Boucher [ JPTRR ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Tip: Just hit enter to submit your reply!
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move