login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Deluxe Materials [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

Tool Review
Video Review included
11
Perfect Plastic Putty
  • move

by: Darren Baker [ CMOT ]


Originally published on:
Armorama

Introduction

Perfect Plastic Putty from Deluxe Materials is a water based filler designed for modellers to specifically use on injection moulded plastic models.

Contents

A single tube of Perfect Plastic Putty contains 40ml of the product and is supplied with a nozzle that can be cut to various sizes depending on the purpose you want to use it for.

Review

If I am honest I only purchased this product out of curiosity after speaking to the owner of a local model shop, my curiosity was because of his conviction over how well the product adhered and how easy it was to clean up after application. When you unscrew the lid of the Perfect Plastic Putty I was surprised to find that there was no seal however the filler did not appear to be effected, the nozzle supplied with the filler is only held on with a rubber band so make sure you pick up a nozzle if it is not attached to the bottle.

I cut the nozzle down on my sample to a 1mm opening and that was a tight fit for a paperclip when inserted in the hole, this size of hole provided me with excellent control over application of the filler without making it difficult to squeeze out the filler. I picked up a DML Flak Panzer V Coelian today and as the fit is not the greatest I used the model to see how well the product worked. I applied a small amount of the filler to some small gaps at the rear of the turret as can be seen by the pictures using controlled application, I then also placed a blob of the filler on the sides of the gun mount and rubbed the filler into the seam using a Mk 1 finger which can again be seen by the pictures. The filler closely resembles very well mixed polyfilla and has a very fine texture, the filler during application stuck extremely well which was much better than I expected.

The drying time for the filler before it can be sanded was approximately one hour and the dry texture is like very fine sandpaper, I was unable to find any shrinkage of the filler when it dried which is another big plus as we have all I am sure found the need on occasion to fill a gap more than once with some fillers. I sanded the filler using good old throw away nail files which more than easily cut through the filler leaving me with the results seen in the next set of pictures. All in all a very impressive product that surprised and impressed me.

Conclusion

What can I say other than I highly recommend you give this filler a try as it is better than I thought possible. It is water based so no smelly chemicals in the mix to cause skin and respiratory problems, it can be cleaned up with water so an error in application or getting some on the carpet is easily cleaned up or removed. Control over application to the model is first rate with excellent control over both flow and placement which also allows for very fine beads of filler to be applied to just about any location that the nozzle tip can reach.

Video of Perfect Plastic Putty

SUMMARY
Highs: This product being water based combined with the controllability of application make this an excellent product.
Lows: I cannot think of any negatives to using this product.
Verdict: An excellent product that I highly recommend you give a try.
Percentage Rating
99%
  Scale: 1:1
  Mfg. ID: BD44
  Suggested Retail: £4.50
  Related Link: 
  PUBLISHED: Dec 02, 2012
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.16%
  MAKER/PUBLISHER: 99.00%

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70ís starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70ís, I have had lots of opportunitie...

Copyright ©2018 text by Darren Baker [ CMOT ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of ModelGeek. All rights reserved.



Comments

Is this an acrylic paste similar to artist's acrylic modeling paste?
DEC 02, 2012 - 06:04 AM
I cannot answer that as there is no indication on the packaging what exactly it is.
DEC 02, 2012 - 07:21 AM
Hi Guys. I recently bought some of the putty after a review in a magazine here in Great Britain.It seems nice to work with and cant detect any harsh odour.Seems a bi like household pollyfilla or Tetrion.Works nice in seams and joints and if not left to go rockhard it sands rather nicely.My recommandation is to give it a try and you will be most pleasantly surprised!!!!. Seasons grretings from Richard
DEC 02, 2012 - 07:33 PM
Darren, Thank you for this review. One of my local hobbyshops has Perfect Plastic Putty in stock, so I'm going to try it based on your review. Merry Christmas!
DEC 03, 2012 - 02:22 AM
Jeff I am sure you will be very happy with this product and it should meet all of your requirements. I have used many types of filler in my life and this is by far the best I have used when it comes to general filling of gaps and holes and the sanding down afterwards with the only possible weakness being cured hardness as milliput will always win that medal for me.
DEC 03, 2012 - 04:15 AM
I remain a little sceptical as some enterprisers market similar or identical formulas as household repair compounds, or artist's supplies, in much smaller quantities at much greater prices.
DEC 06, 2012 - 04:21 AM
We broke our quick reply box. Working on it. Until fixed go to topic to reply.
Thanks.
   

What's Your Opinion?

Video Review

Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move